-40%

DN25 DC 5-24V/AC 220V 3A G1/2 Water Hall Sensor Control Flowmeter Switch Counter

$ 1.36

Availability: 158 in stock
  • All returns accepted: Returns Accepted
  • Brand: Unbranded/Generic
  • Item must be returned within: 60 Days
  • Restocking Fee: No
  • UPC: Does not apply
  • EAN: Does not apply
  • Refund will be given as: Money Back
  • MPN: Does not apply
  • Condition: New
  • Return shipping will be paid by: Seller

    Description

    Visit store
    Items for sale
    About us
    Product Details
    Water flow Sensor 5-24V
    Introduction:
    Water flow sensor is mainly composed of a plastic body, the flow of the rotor assembly and the Hall sensor. Which is mounted in the water heater inlet end for detecting water flow, the water flow through the water when the rotor assembly, and the speed of rotation of the rotor with a magnetic flow change, the Hall sensor output a corresponding pulse signal, feedback to the controller, the control is to determine the size of the water flow regulation.
    Second, the use precautions
    1. non-violent shocks and chemical erosion.
    2. Do throw or hit.
    3. mounted vertically, the tilt of no more than 5 degrees.
    4. medium temperature should not exceed 1200 C.
    Features:
    1. This product appearance lightweight flexible, small size, easy installation.
    2. impeller inlaid stainless steel beads, always wearable.
    3. seal with the structure under the force never leaks.
    4. Hall elements imported from Germany, and with potting package
    Prevent water, never aging.
    5. All materials are in line with ROSH testing standards
    Pin Definition:
    1.Red IN:connect with positive
    2.Yellow OUT:signal output wire
    3.Black GND:connect with negative
    Basic parameters:
    1.The lowest rated working voltage DC4.5 5V-24V
    2.The maximum operating current of 15 mA (DC 5V)
    3.The operating voltage range DC 5 ~ 18 V
    4.Load capacity ≤ 10 mA (DC 5V)
    5.Flow range:1-60L/min(±3%)
    6.Characteristics of Flow pulse:F=(4.8*Q) Q=L/Min
    7.Storage temperature -25 ~ + 80 ℃
    8.Save humidity 25% ~ 95% RH
    Package Include:
    1x DN25 Flowmeter
    Water flow Sensor
    AC 220V
    Description:
    Item's color might be different from the picture because of the aberration.
    This water flow switch can be widely used in petrochemical industry.water treatment for environmental
    protection (Chiller heat pump. water heater) welding equipment and some others systems for monitoring.
    This switch with high performance.it equipped with permanent magnet.With easy Operating Principle.
    100% band new and never used
    Installation Mode:Vertical Or Horizontal(With the symbols of the direction of flow on item)
    Material:ABS/Plastic
    Color:Black
    No standby power requirement
    Simple installation and adjustment
    Self-Clean Function
    Pipe diameter:20mm
    Contact Form:A
    Max Contact Rating:10W
    Max Switching Voltage:220V
    Min Breakdown Voltage:200 VDC
    Max switching current:3.0 A
    Package Included:
    1 x Water Flow Switch
    Water flow Sensor Square
    Description:
    100% brand new and high quality
    The water flow sensor is applied for water heater, and can be used as flow switch.
    Straight structure, nylon and glass fiber made, waterproof and explosion-proof, heat and cold resistant
    Portable size and light weight, easy to install
    With stainless steel ball inside of the impeller, wear-proof
    Three wire connection: Red for positive, black for negative, yellow for pulse signal
    Maximum water pressure: 1.75MPa
    Working range: 1-30L/min
    Size: Approx. 5.6*3.5*3.5cm (L*W*H)
    External diameter: 1.9cm
    Inner diameter: 1.1cm
    Cable length: 10.5cm
    Color: Black
    Note:
    Avoid strong impact and chemical erosion;
    Forbid to throw or collision;
    Install vertically, angle of inclination should not be exceeded 5 degree
    Medium temperature should not be exceeded 120℃
    Package Included:
    1 x Water Flow Sensor
    Water flow Sensor Round
    Description:
    the lowest rated working voltage: DC4.5 5V-24V
    maximum operating current: 15 mA (DC 5V)
    working voltage range: DC 5~18 v
    load capacity: ≤ 10 mA (DC 5V)
    use temperature: ≤ 80 ℃
    operating humidity range: 35%~90%RH (no frost)
    allowing pressure: pressure 1.75Mpa
    temperature: -25~+80 ° c
    External threads: 1/2"
    Size:
    Application:
    water heaters, credit card machines, water vending machine, flow measurement device!
    Package Included:
    1 x Water flow sensor flowmeter Hall flow sensor Module Water control 1-30L/min
    Payment Method
    Shipping Policy
    Returns & Refund Policy
    Feedback
    Payment Method
    EBAY Managed Payment.
    But we only
    Accept
    your
    Ebay Address
    , please Make sure it's 100% right.
    Payment must be received in 5 business days of auction closing.
    Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    Shipping Policy
    1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
    2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
    3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
    Returns & Refund Policy
    All package need to
    wait 30 days
    (US only n
    eed 7-10 days)
    ,
    Please take care it.Less than 30 days,we can't take a refund
    .
    If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
    If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    Feedback
    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.