-40%
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6
Harig Surface Grinder,Hand Op.6

Harig Surface Grinder,Hand Op.6"x12"Cap.W/Acu-Rite DRO,5"x10"Mag Chuck,XNice90's

$ 1344.15

Availability: 100 in stock
  • Brand: Harig 612
  • Country/Region of Manufacture: United States
  • All returns accepted: ReturnsNotAccepted
  • Model Year: 90's+/-
  • Model: 612
  • Condition: Here's your chance to own a very nice Surface Grinder,Harig Hand Operated 6"x 12"Cap.W/Acu-Rite DRO, & Yussa Mag Chuck ….Xtra Nice,90's+/-! that we just got in and all this one needed is a good cleaning ...the paint is good but it's got some streaks....other than that it's a good machine and it runs great too!!The motor & spindle run smooth and it sounds nice too!....it's good running grinder and you wont be disappointed.Thanks For Looking ~ Davis Machinery LLC 4012259582

    Description

    Important Bidding /Buying Information Related To This Listing
    Each item is described to the best of our ability
    We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On
    Occasion
    And Because Of This We Ask That You Be 100% Sure You Know What Your Buying & What To Expect When It Arrives
    Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However,Should This Not Be Possible Or
    Practical
    Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives !!!
    Notice ;
    This Has Been ,Inspected And Tested For It's Function Only ...We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It's Installation ,Operation & Safe Guarding.
    Any And/Or All Issues Or Concerns
    With Regards Safety Are The Buyers Sole Responsibility
    And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above
    Machine Details
    (1) Pre-Owned /Used
    Surface Grinder,Harig Hand Operated 6"x12"Cap.W/ Yuasa  510 Chuck ,Acu-Rite DRO,Xtra Nice 90's+/-!
    Model -612..(W/5"x10"Mag.Chuck)
    Electrical - 230/460 Volts,3Ph,/5060Hz
    Motor - 1 Hp 3450 Rpm
    Specifications:
    Hand Feed Table
    Table working surface - 12" x 6"
    T slot -7/16" wide
    Table travel -8" X, 7-1/4" +/-
    Work height -Min. 3-1/8"  x  Max. 16"
    Grinding wheel  -
    8" x 3/4" x 1 1/4
    Motor -1 HP 3450 RPM
    Floor space -48" x 36" x 65"+/-
    Weight -800 pounds+/-
    Complete With;
    Cabinet Base
    Acu-Rite 2 Axis Digital Read Out
    Work Lamp
    5"x10" Yussa Mag Chuck
    Mag Starter W/110 Transformer for lights and or DRO
    Overall Condition - Very Good , Runs Great !!!
    ** INSPECT UNDER POWER IN OUR PROVIDENCE RI 02905
    WAREHOUSE
    ***
    Should You Need Help Getting Good Rate Please Give Us Your Zip Code and Let Us Know If It's A Residential Delivery And Will A Lift-gate Be Required And We Will Get You The Best Possible Shipping Rate
    Additional & Optional After Sale Services
    Packing/Skidding ..................5.
    Packing/Crating.....................5.
    Above Are The Typical Minimum Trucker Requirements Needed To Obtain The Best Rates
    Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered
    ...Or if you wish;
    Pick It Up Yourself, No Charge For Loading
    Thanks
    Brenda & Cliff Davis
    Davis Machinery LLC
    4012259582
    bdavis
    AT
    davismachinery
    DOT
    c o m