Hubbell Lt Almond Occupancy Sensor Switch Ultrasonic Adaptive 120/277V AU2000LA1

Description

Fruit Ridge Tools, LLC
Our eBay Store
Contact Us
Add to Favorite Sellers
Hubbell Lt Almond Occupancy Sensor Switch Ultrasonic Adaptive 120/277V AU2000LA1
Product Details
Quantity in Lot:
1
Brand:
Hubbell
Part Number:
AU2000LA1
Color:
Light Almond
Type:
Occupancy Sensor
Switch Configuration:
Single Pole
Additional Features (if applicable):
Voltage:
120/277V
Grade:
Commercial Specification Grade
Terminal Type(s):
Wire Leads
Ground:
Grounding Wire
Hubbell AU2000LA1 light almond occupancy sensor switch. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor’s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:
No neutral required
Single pole
Vacancy mode option - can be set to turn on automatically when motion is detected or to turn on only when the manual ON/OFF switch is pressed
Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.
Manual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4-30 minutes) or automatically using the built-in Intelli-DAPT technology
Coverage: 400 square feet
Load ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1/6 HP @ 120/277V
Ultrasonic sensor - senses occupancy by emitting an ultrasonic high-frequency sound wave (32 kHz to 45 kHz), sensing the frequency of the reflected signal, and then determining occupancy based on a change in frequency. While this has a limited range, it detects small motions and does not require a clear line of sight
Built in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles
Impact resistant hard lens is standard and color matched to the switch
Fits standard decorator/GFCI style wallplates (purchased separately)
This is New Old Stock and is returnable for any reason. (SKU # HUBAU2000LA1-EA; Weight: 0.3500 lbs.)