Polymaker Polysher Post Processing Device to Smooth Print Surface

Description

Polymaker Polysher Post Processing Device to Smooth Print Surface
The item is used. Tested that is powers on. Tested that it sprays. The platform was broken last person who owned tried to glue it. Cleaned and removed all the glue.
Item comes with the box ( not in good shape).   Comes with the
Power Supply ,
Operation Manual ,
Suction Pipette
The
Polysher
is a desktop post processing unit designed to remove layer lines from the
Polymaker
PolySmooth and PolyCast specialty filament prints. Using included nebulizers, the Polysher uses Polymaker's Layer-Free technology to create a fine mist of alcohol that evenly smoothens out the filament.
Compatible Material: PolySmooth/PolyCast polishing liquid: Alcohol (>70%) (IPA, Ethanol)
Polishing Time: 20-40 minutes (varies based on part size, alcohol concentration, and ambient temperature)
Operating Temperature: 59 to 90°F
Storage Temperature: 32 to 100°F
Operate the Polysher:
3D print your part with PolySmooth, just like what you normally do with PLA;
Place the printed part in the Polysher;
Set the polishing time by turning the knob; a typical part takes 20 - 40 minutes, depending on the size and environmental temperature;
Once polishing is finished, the stage will automatically lift up for you to easily get the part.
In addition, the liquid reservoir of the Polysher needs to be filled with alcohol. Suitable alcohols are:
Isopropyl alcohol (also known as isopropanol)
Ethanol
with concentrations of no less than 70% (90% or higher recommended). You can choose whatever is more easily available for you. More information on the selection of alcohol polishing liquids can be found in the FAQ section
Specifications of Polysher
Technology:
Micro-Droplet Polishing
Compatible Material:
PolySmooth
Polishing Liquid:
Isopropanol or ethanol, 70% or above [90% or higher recommended]
Polishing Time:
20-40 min typical [varies based on part size, alcohol concentration and ambient temp]
Product Dimensions:
230 x 300 x 360 mm [9.1 x 11.8 x 14.2 in]
Shipping Box Dimensions:
350 x 400 x 450 [13.8 x 15.7 x 18.1 in]
Product Weight:
4 Kg [8.81 lbs]
Shipping Weight:
6.8 Kg [15 lbs]
Maximum Part Size:
Up to a 150 mm (diameter) x 180 mm (height) cylinder [5.9 in (diameter) x 7.1 in (height)]
Operating Temperature:
15-32 °C [59-90 °F]
Storage Temperature:
0-38 °C [32-100 °F]
Power Requirements:
Power Supply: INPUT, AC 100-240V, 50/60Hz, 0.4A. OUTPUT: 5V 2000 mA. Polysher INPUT: DC 5V, 2000 mA