-40%

Regular Spray Rack

$ 130.94

Availability: 20 in stock
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: United States
  • Brand: Door Rack Painter

    Description

    Door Rack Painter - Regular Spray Rack
    Spray on cabinet doors or hollow regular doors (up to 30 lbs) both sides
    Strong aluminum rods are bent at an angle that minimizes contact
    Also spray one side by placing door on top of the racks
    It can be adjusted to accommodate different sized cabinet doors and regular doors
    Method that enables to paint both sides leaving no marks
    Back-side first
    Always paint the
    back-side first
    . On the back-side, apply a light coat of paint, as if the door was sprayed vertically, to avoid drips when turning the door upside down.
    Don’t spray the sides yet, grab from the sides with fingers and turn the door around.
    The least important part of the door is the back edge. Now the painted side will lay, because of gravity, on the bent rods, resulting in minimum contact on the back edge of the interior side.
    Then front and sides next
    Spray the front and the sides. Utilize the grip holders (big or small) to transport. The reason why they are called grip holders is that it allows transporting a totally wet door holding the back edge of the door at a 45° without slipping with minimal marks. Now the doors are ready to be laid on the drying rack remembering to position the rods for the next door.
    On the primer coat,
    is acceptable that you find small marks on the edges.
    After 2 to 3 coats of paint have been applied, marks that need touch-up are very minimal.
    Any possible marks are only on the backside edge
    (the least important part) and can be easily touched up. Using a chip or foam brush tap the edge with the tip.
    Alternate method - One side
    When spraying a semi-gloss or gloss finish it’s nice to load up both sides and not have a thin coat on the inside face of the cabinet.
    After spraying on both sides the primer and the first finish coat, instead of spraying the final coats on both sides, spray the final coat on each side separately using the top of the spray rack.
    On the 18 Door Dry Rack there's space for 9 regular doors up to 30 lbs each.
    On the 30 Door Dry Rack there's space for 15 doors up to 30 pounds each painted on one side using the wood rod shelves.
    Time is being saved by painting the primer and first finish coat on both sides, and completely avoiding any markings by spraying the last coat separately.
    The Spray Rack includes:
    This order includes:
    Regular spray rack
    Two small & Two big sets of cabinet door grip holders
    Two Rack frames
    Two Spray rig and
    brush hook holder.
    Four Aluminum rods with red and black plastic caps (caps hold the rods in place)
    (Spray rig and brush not included)
    Spraying with the Door Rack Painter
    There is minimum contact on the edge of the door, enabling both sides to be painted and stored without disturbing the wet paint.
    • Depending on the corners of the cabinet doors you could have a little spot on the edge that can easily be touched up.
    • But our experience is that if we apply one coat of primer and two coats of finish enamel paint, most of the edges are free of spots and again if there are any left they can be very easily touched up.
    • Spraying clear lacquer or clear polyurethane will not show any spots.
    Turn regular size doors
    • On Regular doors use a 5 to 6″ wood screw to make it easy to turn the doors and transport them over to the dry rack.
    • It takes about 30 seconds to screw in four screws and the same time to remove them.
    • It takes even less time to fill in the four small holes and give it a quick touch up.
    • There is a 35 pound per door limit, which is good for regular doors
    18 Door Dry Rack
    30 Door Dry Rack
    Spray Rack
    Rotating Spray Rack
    Ten Door Dry System
    Spray Both sides





    Paint or Store
    18 cabinet doors or 9 regular doors on both sides.
    30 Cabinet doors on both sides. Adjustable, place any cabinet door up the width of 36″. Also available wooden rods add-on for up to 70 cabinet doors, 15 regular doors, baseboards and more!
    Cabinet doors, regular doors, drawers, shutters, windows, shelves, long baseboards & more
    Spray both sides of cabinet doors. Allows to spray all 4 sides by rotating the Spray Rack. It can be adjusted to accommodate different size cabinet doors up to 26″ wide.
    Stores 10 heavy and medium-sized doors on both sides up to 100 lbs each
    Super combo with Wooden Rods add-on
    Rotating Spray Rack and 30 Door Dry Rack with Wooden rods add-on
    Rotating Spray Rack and 18 Door Dry Rack
    Regular Spray Rack and 18 Door Dry Rack
    Heavy Door Painting System
    Spray and Store both sides wet





    Paint and Store
    Spray and store 48 cabinet doors on both sides. Or 50-70 cabinet doors & 15 regular hollow doors on one side.
    Spray and store 30 cabinet doors on both sides. Or 50-70 cabinet doors and15 regular hollow doors on one side.
    Spray and store 18 cabinet doors on one or both sides.
    Spray and store 18 cabinet or 9 regular hollow doors on both sides.
    Sprays and stores 10 heavy and medium-sized doors on both sides.
    Hundreds of Door Rack Painter's satisfied customers!
    All videos are actual job sites
    There are many satisfied painting contractors using the Door Rack Painter all over the world.
    Since both sides are being painted, the system pays for itself in no-time. Other systems in which you can only store on one side, can drag out your job twice as long.
    By painting the cabinet door horizontally on both sides one automatically gets a better finish thanks to gravity on the front side of the door. If the final coat is separately applied it gives the full effect of a horizontal full finish without any marks on both sides.
    The ongoing storage problem that every painter encounters with cabinet doors is finally solved. With the Door Rack Painter you could store 100+ doors in half the size of a single garage. Try to hang up 100 doors vertically in a small area like this, impossible. Other storage systems take up a lot more space since you can only paint one side at the time.
    There's no need to install anything, no hooks, no brackets, no strings attached to the doors. You come to the job site, set up, remove the doors, prep and start spraying.
    Many painters have shared that the homeowner will comment that they look very professional thanks to the Door Rack Painter, the same goes for paint shops. It immediately organizes your work area and creates a lot more workspace for you.
    The Rotating Spray Rack includes everything in the picture, except sawhorse.
    Recommended: Wooden 24" high sawhorse (Sawhorse not included)
    PATENTED DESIGN #8066267
    Cabinet Door Painting System - YouTube
    Video will open in a new window
    Using the eBay App? Paste link into a browser window:
    [isdntekvideo]
    Painting both sides of regular sized doors at a time - YouTube
    Video will open in a new window
    Using the eBay App? Paste link into a browser window:
    [isdntekvideo]