Rotating Spray Rack & 30 Door Dry Rack - Combo

Description

Door Rack Painter - Combo - Rotating Spray Rack & 30 Door Dry Rack
Spray both sides of cabinet doors with the
Rotating Spray Rack
Strong aluminum rods are bent at an angle that minimizes contact
Also spray one side by placing door on top of the racks
Doors can be sprayed on all 4 sides by rotating the Spray Rack
It can be adjusted to accommodate different size cabinet doors up to 26″
Incredible space saver, this method of stacking improves labor costs for painting contractors and cabinet refinishers.
Store 30 doors wet on both sides using the aluminum rods
Strong aluminum rods are bent at an angle that minimizes contact
Adjustable, place any cabinet door up the width of 36″
Using the wood rod shelves add-on (additional item purchase required) – capable of spraying the final coat on one side (for glossy and enamel finishes): Store 50-70 cabinet doors painted on one side Store 15 regular hollow doors up to 30 lbs and 36″ wide each painted on one side, wooden dowels allow for easy rolling on action Store baseboards & more with (2) 30 Door Dry Racks using the wooden rod add-ons
Method that enables to paint both sides leaving no marks
Back-side first
Always paint the
back-side first
. On the back-side, apply a light coat of paint, as if the door was sprayed vertically, to avoid drips when turning the door upside down.
Don’t spray the sides yet, grab from the sides with fingers and turn the door around.
The least important part of the door is the back edge. Now the painted side will lay, because of gravity, on the bent rods, resulting in minimum contact on the back edge of the interior side.
Then front and sides next
Spray the front and the sides. Utilize the grip holders (big or small) to transport. The reason why they are called grip holders is that it allows transporting a totally wet door holding the back edge of the door at a 45° without slipping with minimal marks. Now the doors are ready to be laid on the drying rack remembering to position the rods for the next door.
On the primer coat,
is acceptable that you find small marks on the edges.
After 2 to 3 coats of paint have been applied, marks that need touch-up are very minimal.
Any possible marks are only on the backside edge
(the least important part) and can be easily touched up. Using a chip or foam brush tap the edge with the tip.
Alternate method - One side
When spraying a semi-gloss or gloss finish it’s nice to load up both sides and not have a thin coat on the inside face of the cabinet.
After spraying on both sides the primer and the first finish coat, instead of spraying the final coats on both sides, spray the final coat on each side separately using the top of the spray rack.
On the 30 door dry rack there' s is space for 30 to 40 doors (depending on the size) painted on one side using the wood rod shelves.
Time is being saved by painting the primer and first finish coat on both sides, and completely avoiding any markings by spraying the last coat separately.
The Rotating Spray Rack and 18 Door Dry Rack Includes:
The combo includes a Rotating Spray Rack and a Dry Rack
Complete cabinet Door Painting System
Two small & 2 big sets of cabinet door grip holders, Two big & 4 small clamps, Two "U" Metal rack fixtures, Four Aluminum rods with red and black plastic caps (caps hold the rods in place), A rotating platform, A Spray gun holder hook (to screw in the side of the sawhorse)
120 Aluminum rods with red and black plastic caps for the dry rack. (Caps hold the rods in place)
Eight brackets for pole attachment
Four Wheels with brakes
Four rack poles and base
Using the Door Rack Painter
• There is minimum contact on the edge of the door, enabling both sides to be painted and stored without disturbing the wet paint.
• Depending on the corners of the cabinet doors you could have a little spot on the edge that can easily be touched up.
• But our experience is that if we apply one coat of primer and two coats of finish enamel paint, most of the edges are free of spots and again if there are any left they can be very easily touched up.
• Spraying clear lacquer or clear polyurethane will not show any spots.
Cabinet Doors
Spray the backside of any cabinet door first with a nice but not too heavy of a coat, but don’t paint the sides yet:
• Turn the door by yourself or with a partner by just simply holding onto the sides
• Paint the top and the front side of the cabinet door as heavy as you like.
• Take the cabinet door grip holder in to your hands and hold them on an angle on both edges of the door.
• From here you transport the door painted on both sides to the dry rack.
This method works excellent for cabinet doors.
You will be able to apply a perfect finish on both sides and transport them without disturbing the wet paint.
18 Door Dry Rack
30 Door Dry Rack
Spray Rack
Rotating Spray Rack
Ten Door Dry System
Spray Both sides
✓
✓
✓
✓
✓
Paint or Store
18 cabinet doors or 9 regular doors on both sides.
30 Cabinet doors on both sides. Adjustable, place any cabinet door up the width of 36″. Also available wooden rods add-on for up to 70 cabinet doors, 15 regular doors, baseboards and more!
Cabinet doors, regular doors, drawers, shutters, windows, shelves, long baseboards & more
Spray both sides of cabinet doors. Allows to spray all 4 sides by rotating the Spray Rack. It can be adjusted to accommodate different size cabinet doors up to 26″ wide.
Stores 10 heavy and medium-sized doors on both sides up to 100 lbs each
Super combo with Wooden Rods add-on
Rotating Spray Rack and 30 Door Dry Rack with Wooden rods add-on
Rotating Spray Rack and 18 Door Dry Rack
Regular Spray Rack and 18 Door Dry Rack
Heavy Door Painting System
Spray and Store both sides wet
✓
✓
✓
✓
✓
Paint and Store
Spray and store 48 cabinet doors on both sides. Or 50-70 cabinet doors & 15 regular hollow doors on one side.
Spray and store 30 cabinet doors on both sides. Or 50-70 cabinet doors and15 regular hollow doors on one side.
Spray and store 18 cabinet doors on one or both sides.
Spray and store 18 cabinet or 9 regular hollow doors on both sides.
Sprays and stores 10 heavy and medium-sized doors on both sides.
Hundreds of Door Rack Painter's users!
Actual job sites
There are many satisfied painting contractors using the Door Rack Painter all over the world.
Since both sides are being painted, the system pays for itself in no-time. Other systems in which you can only store on one side, can drag out your job twice as long.
By painting the cabinet door horizontally on both sides one automatically gets a better finish thanks to gravity on the front side of the door. If the final coat is separately applied it gives the full effect of a horizontal full finish without any marks on both sides.
The ongoing storage problem that every painter encounters with cabinet doors is finally solved. With the Door Rack Painter you could store 100+ doors in half the size of a single garage. Try to hang up 100 doors vertically in a small area like this, impossible. Other storage systems take up a lot more space since you can only paint one side at the time.
There's no need to install anything, no hooks, no brackets, no strings attached to the doors. You come to the job site, set up, remove the doors, prep and start spraying.
Many painters have shared that the homeowner will comment that they look very professional thanks to the Door Rack Painter, the same goes for paint shops. It immediately organizes your work area and creates a lot more workspace for you.
The Rotating Spray Rack includes everything in the picture, except sawhorse.
Recommended: Wooden 24" high sawhorse (Sawhorse not included)
The Rotating Spray Rack works only with cabinet doors up to 26" wide.
Purchase of the wooden rod shelves add-on is separate.
PATENTED DESIGN #8066267
Painting 30 cabinets doors on both sides - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Cabinets painting doors on one side - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]