Rust-Oleum 280882 Specialty Tub and Tile Spray Paint, 12-Ounce, White 1 Pack

Description

Rust-Oleum 280882 Specialty Tub and Tile Spray Paint, 12-Ounce, White
Apply to ceramic, porcelain or fiberglass including tiles, sinks and tubs
One-step epoxy acrylic formula withstands moisture and extreme hot temperatures
Dry to the touch in 15 minutes and covers up to 15 sq ft per can, allow surface to fully dry for 3 days prior to water exposure
Durable and corrosion-resistant finish
Smooth, glossy, porcelain-like, waterproof finish
5-7 Cans Needed to Cover a Standard Bathtub
Rust-Oleum Specialty Tub and Tile Aerosol
Apply a Smooth, Porcelain-Like Finish in Just Minutes
Use to Update and Renew Tub and Tile Surfaces with a Washable, Waterproof Finish
Refreshes with the Look of Porcelain or Ceramic Tile
Superior Adhesion in Water
Waterproof Epoxy Acrylic Formula Withstands Extreme Hot Temperatures
Excellent Wear & Abrasion Resistance
Outstanding Color Retention in High Moisture Areas
Available in White
Works on Ceramic Tile and Porcelain Surfaces
Demolition Free Product
Update Bathrooms or Kitches Easily with no Messy Demo
Saves Time and Money
Cleaning Supplies Needed
- Bleach (if needed to remove mildew).
- Abrasive Cleanser like Comet.
- Abrasive Pad.
- Lime-A-Way.
- Sandpaper (#400/#600 grit wet/dry).
- Tack Cloth.
- Room Fan.
Surface Preparation
- Remove metal drains, sand or wire brush peeling paint away.
- Repair chips or cracks with patching compound.
- Remove any mildew with solution of bleach and water.
- Remove all caulk and wipe area clean.
- Prepare surface with an abrasive pad and Lime-A-Way.
- Sand surface with #400/#600 grit wet/dry sandpaper & rinse.
- Before painting, wipe surface clean with dry tack cloth.
Application
- Use painter's tape to mask coverage area.
- Open windows and/or turn on fans for proper ventilation.
- Shake can for 1 minute after the mixing ball begins to rattle.
- Shake often during use.
- Hold can 10-16" from surface.
- Apply 2-3 light coats, spraying horizontally and vertically.
- Allow to dry 3 days before exposing to water.
Tips & Tricks
- Use a standard household cleaner prior to painting.
- Avoid use of muriatic acid.
- Spray in steady back-and-forth motion.
- Slightly overlap each stroke.
- Re-caulk affected areas of tub prior to using.