Rust-Oleum 7860519 Tub And Tile Refinishing 2-Part Kit, White, Single, 32 Fl Oz

Description

Rust-Oleum 7860519 Tub And Tile Refinishing 2-Part Kit, White, Single, 32 Fl Oz
Product Information
Prepare and paint surface the same day with a tough, 2-part epoxy acrylic formula that withstands moisture and resists corrosion
For best results, thoroughly mix parts A and B separately before mixing together for 2 minutes-once combined be sure to use within 6 hours of mixing
Each kit covers up to 110 sq ft; two coats highly recommended; wait 1-2 hours to recoat allow to dry for 3 days before exposing to water
Make sure to adequately ventilate area by opening windows and turning on a fan to circulate air
Properly prep surface and read all directions included in kit thoroughly before beginning project
Product Description
Specialty Tub & Tile Refinishing kit is unique product that combines the durability of an acrylic with a 2-part epoxy paint formula. Provides excellent adhesion and color retention in high moisture areas. Makes old tile look new again with a coating that provides the look and feel of porcelain without the mess or cost of complete tile replacement. Works great to renew ceramic or porcelain tile, fiberglass, acrylic, cast iron and steel tubs and sinks. Not for use on galvanized steel, flexible plastic or areas subject to continuous water immersion like fountains, swimming pools or hot tubs.
From the Manufacturer
Rust-Oleum Tub and Tile Refinishing kit is a durable high-performance, epoxy, acrylic paint that combines the performance of a professional quality formula with the convince of a consumer-friendly process.
Description
One kit covers 2 coats over a standard bathtub
Rust-Oleum Specialty Tub and Tile Refinishing
Apply a smooth, porcelain-like finish in just hours.
Use to Update and Renew Tub and Tile Surfaces with a Washable, Waterproof Finish
Refreshes with the look of Porcelain or Ceramic Tile
Superior Adhesion in Water
Self-Leveling Formula Minimizes Brush Strokes and Makes for Easy Application
Excellent Wear and Abrasion Resistance
Flexible Application - Short Nap Roller or Sprayer
No Yellowing
Use to Paint Tubs, Sinks and Wall Tile
Demo Free Product
Update Bathrooms or Kitchens easily with no Messy Demo
Works on:
Ceramic Tile
Porcelain
Fiberglass
Acrylic
Cast Iron
Steel Surfaces
Interior Surfaces
Kitchen Backsplashes
Fast Drying.
Durable.
Corrosion Resistant.
Cleaning Supplies Needed
- Bleach (if needed to remove mildew)
- Abrasive Cleanser like Comet
- Abrasive Pad
- Lime-A-Way
- Sandpaper (#400/#600 grit wet/dry)
- Tack Cloth
- Room Fan
Paint Supplies Needed
- Wooden Stir Stick
- Goggles/Glasses
- Latex Gloves
- Lacquer Thinner or Isopropyl Alcohol for Clean-Up
- One of the Following:
1. High-Quality, Short Nap Kitchen & Bath Roller
2. High-Quality, Fine Bristle Varnish Brush
3. Conventional or Airless Sprayer
Surface Preparation
- Remove metal drains, sand or wire brush peeling paint away.
- Repair chips or cracks with patching compound.
- Remove any mildew with solution of bleach and water.
- Scrub surface with an abrasive cleaner and rinse thoroughly.
- Remove all caulk and wipe area clean.
- Prepare surface with an abrasive pad and Lime-A-Way.
- Sand surface with #400/#600 grit wet/dry sandpaper & rinse.
- Before painting, wipe surface dry with tack cloth.
Application
- Use painter's tape to mask coverage area.
- Open windows and/or turn on fans for proper ventilation.
- Mix Part A and Part B separately, then together with stir stick.
- Apply paint with high quality 4" nap roller.
- Allow to dry at least one hour before applying second coat.
- Allow to dry 3 days before exposing to water.
Tips and Tricks for Perfect Results!
- Use a standard household cleaner prior to painting.
- Avoid use of muriatic acid.
- Avoid excessive rolling.
- Use light, even strokes while keeping a wet edge.
- For touch ups and corners, use a small foam brush.
- Use within 6 hours of mixing.
- Remove painter's tape 1 hour after final topcoat.
- Re-caulk affected areas of tub prior to using.
- Allow paint to dry/cure for 3+ days before exposing to water.
Delivery Information
The form will be sent within 3 days of receiving the payment. (Most deliveries happen within 24 hours of receiving payment.)
It may happen that charging within 24-48 hours, due to random events.
Returns Information
In case that template does not work, or for some reason the support is not able to solve the problem.
The buyer is entitled to
30 day money back guarantee
.
The warranty period is counted from the date of sending template.
There will be no reimbursement in case the client: provided the seller with incorrect or false information, issued negative feedback before contacting the seller first, or requested money back without giving any reason.
.
TRUSTED SELLER
You are guaranteed a secure purchase.
EXPRESS DELIVERY
100% SUPPORT!
In case of any problem we will help.