-40%

WASTE OIL HEATER Multi-Fuel with Pedestal & Chimney Kit - 120,000 BTU - 15 Gal

$ 2788.89

Availability: 12 in stock
  • All returns accepted: ReturnsNotAccepted
  • Brand: Pacific Tundra
  • Type: Waste Oil Heater
  • MPN: PT36626
  • Amps: 3.8
  • Model: PTAENH001
  • Condition: New
  • Country/Region of Manufacture: United States
  • UPC: Does not apply
  • BTU: 120,000
  • Gallons: 15
  • Volts: 115

    Description

    Free Shipping
    within the
    Lower 48 United States
    . If you are located outside of the Lower 48 United States, please request a freight quote.
    Model Number:
    PTAENH001 & PT36626 & PTBAE0209
    Condition:
    New
    Description:
    WASTE OIL HEATER Multi-Fuel with Pedestal & Chimney Kit - 120,000 BTU - 15 Gal
    Features:
    120,000 BTU - 15 Gallon Capacity - Burn Used or New Motor Oil, Vegetable Oil, Used or New Transmission Fluid, Used or New Hydraulic Fluid and Kerosene in this Heater - 6" Flue - EPA, UL and CUL/CSA Approved - Includes Through-the-Wall Chimney Kit and 12" Pedestal.
    THIS LINE OF COMMERCIAL EXHAUST FANS IS AVAILABLE IN FOLLOWING CONFIGURATIONS:
    Sizes range between 24" to 48"
    Motors from 1/3 to 2 Hp
    Single Phase or 3 Phase
    CFM Ranges from 3,270 to 25,455
    Please Note:
    These units are built to order. Please allow 5 to 8 Business Days for manufacturing and shipping
    Description & Specification:
    Commercial Heavy Duty 120,000 BTU Waste Oil and Multi-Fuel Heater with Through-the-Wall Chimney Kit and 12" Pedestal - EPA, UL and CUL/CSA Approved
    Designed for Commercial Applications - Ideal for commercial garages, fleet maintenance facilities and other commercial facilities.  Easy to maintain and operate
    Burn the Following Oils & Fluids in this Heater:
    Used or New Motor Oil, Vegetable Oil - Used or New Transmission Fluid, Used or New Hydraulic Fluid and Kerosene
    Generates 120,000 BTU of clean affordable heat
    Fuel Tank Capacity: 15 Gallons
    Consumption Rate: 4/5th of a gallon of waste or new oil or fluid per hour
    Feed Method: Drip
    Power Source: 115V electric
    Ignition Type: Manual
    Fuel Pump Motor: 3.8 Amp
    Exhaust Pipe Required: 6"
    Connects directly to your existing 6" exhaust piping
    Flue Size: 6"
    Thermostat: Remote
    Exhaust Type: Updraft
    Fan: 16" Circulating - 115V
    Exterior Material: Powder Coated Steel
    Heating Chamber Material: 12 Gauge Steel
    Cleaning & Inspection: Performed through easy-access fire box
    Filtering: Spin-on filter (similar to an automotive oil filter)
    This heater is fully enclosed to reduce noise
    Control box has integrated circuit board and indicator lights
    Note: this heater will burn sythetic oil
    ONLY
    when it is deluted with 75% petroleum based motor oil.  Synthetic oil cannot be greater than 25% of the oil used to fuel this heater.  This heater will not burn straight synthetic oil nor oil that is contaminated with water or anti-freeze
    Oil needs to be at least 45ºF to properly circulate through the pump - you may need to heat your oil before you fire your heater
    EPA approved for use in all states in the USA
    Listings and Approvals: UL - Conforms to UL Standards - CUL/CSA - Conforms to CUL/CSA Standards
    Includes 12" pedestal which raises heater 12" off the ground and provides easier access for fueling, cleaning and maintenance
    Includes Through-the-Wall Chimney Kit - 6" (see photo in this listing)
    Optional Item: Model PT221551
    - Waste Oil Collection and Holding Tank - Eliminates awkward drain pans and reduces spills. 14 gauge steel tank has pneumatic spoked wheels, steerable front caster and a long handle for easy transport. Low profile slips under any car or truck. Removable metal screen for draining filters. V-bottom tank slopes and has a 3/4" clean-out hole for easy drainage. Uses any standard furnace filter to capture larger non-burning particles.  Please Inquire.
    Optional Item:
    Model PTBAE0209
    - Heater Stand/Pedestal - Raises your heater 12" off the ground - provides easier access for fueling, cleaning and maintenance (please inquire)
    Optional Item:
    Model PTBAE0209
    - Through-the-Wall Venting Kit - 6" (please inquire)
    Overall Dimensions: 23" W x 30" L x 42" H
    Please allow 2 weeks for delivery - we build this heater to order
    Ship weight: 297 Lbs
    5 Year Manufacturer's Warranty on Heat Chamber (Includes Parts & Labor)
    1 Year Manufacturer's Warranty on Remainder (Includes Parts & Labor)
    Lifetime technical support
    is included
    Returns ARE NOT accepted for this heater as we built them to order.  Should you heater become inoperable for ANY reason, you will be required to exercise your warranty and call our technical support.  We will not only provide technical support, we will also provide parts as needed at no charge under your warranty
    Made in the U.S.A.